Hard water in San Diego, CA
What City of San Diego Public Utilities published about hardness for 2025, and what it means for scale, appliances and softener sizing.
13.8–14.2 gpg
Very hard 237–243 mg/L as calcium carbonate · range of city treatment-plant averages
Source: City of San Diego Public Utilities, 2025 Annual Drinking Water Quality Report. Data year 2025. Figures checked against the source on 2026-11-18.
Every hardness figure in the report
| Figure as published | mg/L (ppm) | Grains per gallon | USGS class |
|---|---|---|---|
| Alvarado Treatment Plant, average | 237 | 13.8 | Very hard |
| Miramar Treatment Plant, average | 242 | 14.1 | Very hard |
| Otay Treatment Plant, average | 243 | 14.2 | Very hard |
| Purchased treated water, average | 145 | 8.5 | Hard |
The line in the report reads:
Total Hardness ppm: 237 / 242 / 243 / 145; gr/Gal: 13.8 / 14.1 / 14.2 / 8.5
These numbers describe the utility's system as sampled, not the water at a particular address. Home softeners, water heaters and building plumbing can all change what comes out of your tap. A test kit or strip at your own faucet gives the number to set equipment to.
What it means for your home
At 13.8–14.2 gpg, the main costs of hard water are practical: mineral scale inside tank water heaters and on heating elements, buildup in dishwashers, kettles and coffee makers, crusted aerators and showerheads, and extra soap and detergent. An ion-exchange water softener removes calcium and magnesium; most carbon and sediment filters do not.
Softener sizing example for San Diego
A household of 3 using 82 gallons per person per day (the EPA WaterSense home average) at 14.2 gpg needs a softener to remove about 3,493 grains per day, or 24,452 grains between weekly regenerations. Run the numbers for your household →
Questions
How hard is the water in San Diego, CA?
City of San Diego Public Utilities does not publish one citywide figure. Its 2025 Annual Drinking Water Quality Report gives 13.8–14.2 gpg (237–243 mg/L) across range of city treatment-plant averages, covering 2025. On the USGS scale that is very hard.
What hardness setting should I use for a softener in San Diego?
The published figures range from 13.8–14.2 gpg. Your number depends on which plant, zone or source serves your address, so test at your own tap; if you can't, the top of the range (14.2 gpg) is the conservative choice.
Is hard water in San Diego a problem?
There is no EPA drinking-water limit for hardness, so this site treats it as a cost and maintenance question. Its practical effects are scale in water heaters and appliances, more soap use and spots on fixtures and glass.